BFS-VDIG 03
1.111,00 €
This driver was specially developed for controlling seed diodes in solid-state and fiber lasers.
The digital control completely eliminates the analog input signal and can be set in 2 ns steps with a resolution of 2 mA.
The digital output stage can be used to generate any pulse shape with a maximum time resolution of 300 ns and a minimum pulse duration of approximately 1 ns.
The pulse-to-pulse deviation is better than 1×10-6, confirmed by measurements under laboratory conditions.
With an output current of 0 to 2 A, it provides sufficient current to overdrive single-mode diodes for short pulses.
Of course, protective functions are built in and the driver is cooled via the base plate, like all other PicoLAS drivers.
- Quality Made in Germany
- Designed, build & checked in house
| Weight | 0,098 kg |
|---|---|
| Dimensions | 8,7 × 6,5 × 1,9 cm |
| Output current | 0 .. 2 A |
| Pulseduration | ~1 ns … 300 ns |
| Rise time | 1 ns |
| Max. pulse repetition frequency | 2 MHz |
| Features | Pulse controlled via CPU |
| Supply Voltage | 12 V, MAX +20V, MIN +11V, DC |
| Control interface | Analog, Digital |
| Dimensions in mm | 65 x 85 x 15 |
| Weight in g | 110 |
| Operating temperatur | -20 °C to +75 °C |
This driver was specially developed for controlling seed diodes in solid-state and fiber lasers.
The digital control completely eliminates the analog input signal and can be set in 2 ns steps with a resolution of 2 mA.
The digital output stage can be used to generate any pulse shape with a maximum time resolution of 300 ns and a minimum pulse duration of approximately 1 ns.
The pulse-to-pulse deviation is better than 1×10-6, confirmed by measurements under laboratory conditions.
With an output current of 0 to 2 A, it provides sufficient current to overdrive single-mode diodes for short pulses.
Of course, protective functions are built in and the driver is cooled via the base plate, like all other PicoLAS drivers.
| Weight | 0,098 kg |
|---|---|
| Dimensions | 8,7 × 6,5 × 1,9 cm |
| Output current | 0 .. 2 A |
| Pulseduration | ~1 ns … 300 ns |
| Rise time | 1 ns |
| Max. pulse repetition frequency | 2 MHz |
| Features | Pulse controlled via CPU |
| Supply Voltage | 12 V, MAX +20V, MIN +11V, DC |
| Control interface | Analog, Digital |
| Dimensions in mm | 65 x 85 x 15 |
| Weight in g | 110 |
| Operating temperatur | -20 °C to +75 °C |
This driver was specially developed for controlling seed diodes in solid-state and fiber lasers.
The digital control completely eliminates the analog input signal and can be set in 2 ns steps with a resolution of 2 mA.
The digital output stage can be used to generate any pulse shape with a maximum time resolution of 300 ns and a minimum pulse duration of approximately 1 ns.
The pulse-to-pulse deviation is better than 1×10-6, confirmed by measurements under laboratory conditions.
With an output current of 0 to 2 A, it provides sufficient current to overdrive single-mode diodes for short pulses.
Of course, protective functions are built in and the driver is cooled via the base plate, like all other PicoLAS drivers.
