PLCS-21
1.198,00 €
Please note that we have quantity based prices. The price will be adjusted accordingly in the shopping cart.
This product is in stock.
Our pulse generator PLCS-21
The PLCS-21 is a digital pulse generator and can be plugged directly onto most LDP-V and LDP-AV D06 driver models (See compatibility list). The PLCS-21 allows easy control of the driver in conjunction with the PLB-21 control panel or directly with the PC via the USB interface. All relevant parameters, such as output current, pulse duration and repetition rate, can be set.
• Digital pulse generator
• Control unit for compatible LDP-V and LDP-AV D06 drivers
• Digital interface and PLB-21 compatibility
• Supply Voltage: 15 V
• Puls duration: 2 ns .. 1 s
• Repetition rate: 1 Hz .. 2 MHz
• Trigger input: 50 Ohm 5 V SMC, 500 Ohm 5V 2 Pin connector
• Dimensions in mm: 67.7 x 42.3 x 11
Compatible devices for direct plug-in of the PLCS-21
• LDP-V 03-100
• LDP-V 50-100
• LDP-V 80-100
• LDP-V 240-100
• LDP-AV D06-N10
• LDP-AV D06-N20
- Quality Made in Germany
- Designed, build & checked in house
| Weight | 0,12 kg |
|---|---|
| Dimensions | 20 × 13 × 7 cm |
| Supply Voltage | +15 V |
| Pulseduration | 2ns .. 1s |
| Control interface | PLB-21, USB 2.0 |
| Dimensions in mm | 67.7 x 42.3 x 22 |
| Weight in g | 26 |
| Operating temperatur | 0 to +55 °C |
Our pulse generator PLCS-21
The PLCS-21 is a digital pulse generator and can be plugged directly onto most LDP-V and LDP-AV D06 driver models (See compatibility list). The PLCS-21 allows easy control of the driver in conjunction with the PLB-21 control panel or directly with the PC via the USB interface. All relevant parameters, such as output current, pulse duration and repetition rate, can be set.
- Digital pulse generator
- Control unit for compatible LDP-V and LDP-AV D06 drivers
- Digital interface and PLB-21 compatibility
- Supply Voltage: 15 V
- Puls duration: 2 ns .. 1 s
- Repetition rate: 1 Hz .. 2 MHz
- Trigger input: 50 Ohm 5 V SMC, 500 Ohm 5V 2 Pin connector
- Dimensions in mm: 67.7 x 42.3 x 11
Compatible devices for direct plug-in of the PLCS-21
The calibration process is carried out by ramping up the high voltage (HV) from the user definied minimum value to the maximum value. This is done by sending out a pulse with 50 ns pulse duration and varying the HV voltage between each pulse. At each data point the corresponding current value is measured and stored in the database.
Thus, it is very important how the rise time of the current signal is. If the rise time exceeds the pulse duration at a given current, the full current is not achieved anymore. This can lead to deviations between the … Read more
The PLCS-21 is a digital pulse generator and only generates a 5 V high signal apart from its 0 V low state.
Thus, the PLCS-21 is not suitable for drivers with an analog signal input as only these two values are possible and also its precision is limited as only these two states need to be differentiated.
For drivers which require an analog input signal PicoLAS offers the PLCS-40. The PLCS-40 is an arbitrary pulse generator (pulsed-AWG) with an internal memory which can store up to 32 freely programmable curve shapes with a maximum duration of 320 ns.
| Weight | 0,12 kg |
|---|---|
| Dimensions | 20 × 13 × 7 cm |
| Supply Voltage | +15 V |
| Pulseduration | 2ns .. 1s |
| Control interface | PLB-21, USB 2.0 |
| Dimensions in mm | 67.7 x 42.3 x 22 |
| Weight in g | 26 |
| Operating temperatur | 0 to +55 °C |
Our pulse generator PLCS-21
The PLCS-21 is a digital pulse generator and can be plugged directly onto most LDP-V and LDP-AV D06 driver models (See compatibility list). The PLCS-21 allows easy control of the driver in conjunction with the PLB-21 control panel or directly with the PC via the USB interface. All relevant parameters, such as output current, pulse duration and repetition rate, can be set.
- Digital pulse generator
- Control unit for compatible LDP-V and LDP-AV D06 drivers
- Digital interface and PLB-21 compatibility
- Supply Voltage: 15 V
- Puls duration: 2 ns .. 1 s
- Repetition rate: 1 Hz .. 2 MHz
- Trigger input: 50 Ohm 5 V SMC, 500 Ohm 5V 2 Pin connector
- Dimensions in mm: 67.7 x 42.3 x 11
Compatible devices for direct plug-in of the PLCS-21
